Brewing Unit for SIEMENS EQ9
The brewing group with powder chute is specially designed for Siemens EQ.9 fully automatic coffee machines.
SKU: D192008
Bean Container for BOSCH/SIEMENS
Bean container complete with finger protection grid, the rubber edge at the top and the seal towards the grinder.
SKU: D391073
Flow Switch for SIEMENS
AVAILABLE ON DEMAND ONLY ETA FOR SUPPLY AND DELIVERY IS ESTIMATED AT 6-8 WEEKS BUT CAN CHANGE WITHOUT PRIOR NOTICE FROM SUPPLIER DEPENDING ON MANUFACTURING LEAD TIMES
SKU: 00637486
Reed Switch for Water Tank BOSCH/SIEMENS
Reed switch with sensor carrier for the water level indicator of the Siemens EQ.6 and Bosch VeroAroma
SKU: D319501
Hold Down Device for Brewing Unit
This hold-down is only plugged in and is located at the top of the brewing unit with handle
SKU: 1212055
Milk Frother for BOSCH/SIEMENS
*AVAILABLE ON DEMAND ONLY
ETA FOR SUPPLY AND DELIVERY IS ESTIMATED AT 5-7 WEEKS BUT CAN CHANGE WITHOUT PRIOR NOTICE FROM SUPPLIER DEPENDING ON MANUFACTURING LEAD TIMES
SKU: 00419947
Trigger for A-046 Drive MELITTA/BOSCH/SIEMENS/NIVONA
the driver and trigger are located on the drive shaft of the drive unit and actuate the drainage valve.
SKU: 5171179
Flow Adjuster for Pump – JURA
Connects to vibration pump
For regulating line pressure
Alternative 5073742
SKU: 5150718
Vibration Pump ARS CP3A/ST 65W
65W 230V 50Hz | Fittings ø 1/8″ – ø 6mm | Built-in diode | Connection terminal 6.3×0.8mm
SKU: D331007
Steam Jet for BOSCH/SIEMENS
Suitable for Bosch Benvebuto & Siemens Supresso Compact with long frothing pipe
SKU: 1549120
Shower Screen for Piston
Shower Screen 34mm
Fits on the brew unit piston
OEM Alternative 1081115
SKU: 1081150
Coffee Spout BOSCH/SIEMENS
OEM PART - For coffee distribution
Suitable for Siemens Supresso/Titanium | Bosch Benvenuto Classic/Venice
AVAILABLE ON DEMAND ONLY
4-6 WEEK ETA FOR SUPPLY AND DELIVERY
SKU: D448001
Heating Element 800W BOSCH VERCUP / SIEMENS EQ3
This instantaneous water heater comes complete with the required fuses, sensors and heater connection.
SKU: 5210972
Brewing Unit Docking Piece BOSCH
OEM PART
– For the brewing unit inlet connection.
Suitable for Bosch Vero | Siemens EQ
SKU: 5138808
Milk Coffee Outlet Set for BOSCH/SIEMENS
Complete milk frother beverage outlet
AVAILABLE ON DEMAND ONLY
4-6 WEEK ETA FOR SUPPLY AND DELIVERY
SKU: 5138529
WATER FILTER CARTRIDGE BOSCH/SIEMENS
Model INTENZA For technical use, duration 50 litres – 2 months
SKU: D600027
Drain Valve for A046 Brewing Unit for BOSCH
Fits in the brewing unit
Alternative 1525005
SKU: D120119
Brewing Unit with Handle V4 BOSCH/SIEMENS
OEM PART - Also suitable for:
Bosch Benvenuto | Nivon | Krups XP9000 | Melitta Caffeo | Siemens Surpresso Compact
SKU: 1192300
MILK FROTHER BOSCH/SIEMENS
Only compatible with these model indexes: Bosch Vero: VeroProfessional 100 TCA7151DE /03 -/04 VeroProfessional 100 TCA7159DE /03 Veroprofessional 300 TCA7301 /02 -/03 -/92 -/93 VeroProfessional 300 TCA7308/ 02 -/03 -/92 -93 VeroProfessional 300 TCA7351DE /03 -/03 - /93 04 Siemens EQ.7: EQ.7 TE701509DE /11 -/12 -/13 -/14 EQ.7 Plus AromaSense M-Series TE711509DE /20 -/21 -/22 -/23 Siemens built-in coffee machines TK76K572 /01 -/02 -/03 -/04 -/05 -/93
SKU: 1079040
Brewing Unit SIEMENS/BOSCH
OEM PART – Suitable for Siemens EQ.3 series | Bosch VeroCup 100/300
SKU: 5138750
Lip Gasket for Brew Group Piston
Gasket ø 44.6×37.3×3.8mm
Two used for the coffee group piston
Fits on brewing units 5147229/1192299
SKU: 1585009
Spring S/Steel for Water Tank Valve – GAGGIA/SAECO
Dimensions 10x19mm
Part of delivery valve assembly for water tank with valve 5033028 and ORM gasket 5008675
SKU: 5073339
Spring 4x29mm – SAECO/GAGGIA
OEM PART – Suitable for Miele | Philips | Saeco | Gaggia | Bosch Solitaire | Krups Palatino 905 | Siemens | Solis
For boiler valve needle 1324901
SKU: 1250901
Vibration Pump ARS CP4SP 70W
70W 230V 50Hz | Fittings ø 1/8″- ø 6mm | Built-in diode | Connector terminal 6.3×0, mm
SKU: 1122742
Vibration Pump ARS CP4SP
65W 230/240V 50Hz | Fittings ø 1/8″- ø 6mm | With built-in diode | Connection terminal 6.3×0.8mm
SKU: D331004
Vibration Pump ARS CP3A/ST 65W
65W 230V 50Hz | Fittings ø 1/8″ – ø 6mm | Built-in diode | Lead connector 6.3×0.8mm
SKU: 1122741
Flow Adjuster for Pump – JURA
Connects to vibration pump
For regulating line pressure
Alternative 5150718
SKU: 5073742
Boiler Valve Pin for SAECO
To fit in 1324911 Piston Assembly:
1250901 Spring + 1186901 O-Ring
SKU: 1324901
O-Ring for the Riser Pipe on Brewing unit
ORM Gasket 0065-15 NBR
Ring thickness 1.5mm | Internal ø 6.5mm
SKU: 5087585
O-Ring for PTFE Pipe Connectors
ORM Gasket 0038-20 Black Silicone | Ring thickness 2.0mm | Internal ø 3.8mm
SKU: 1786264
O-Ring 0320-40 Red Silicone for SAECO/GAGGIA
Ring thickness 4.0mm | Internal ø 32.0mm
Brew group piston o-ring
SKU: 1186862
O-Ring Gasket for Water Tank Valve – GAGGIA/SAECO
ORM Gasket 0060-30 Black Silicone
Ring thickness 3.0mm | internal ø 6.0mm
Part of delivery valve assembly for water tank with valve 5033028 and spring 5073339
SKU: 5008675
O-Ring for Steam Pipe
ORM GASKET 0060-20 TERMOIL | ring thickness 2.0mm – internal ø 6.0mm
SKU: 1786322
Lip Seal for Water Tank Delivery Valve
Dimensions 23x15x5
Used generally as the water tank seal.
Part of the delivery valve 1525004 –
SKU: 1301002
Lip Seal 23x15x6mm for Water Tank
Suitable for Bosch Solitaire | Krups Palatino | Saeco | Siemens
Fits onto water tank underside
SKU: 1186700
Gearmotor for Brew Group (P124 Assembly)
This motor sits in the gearbox and drives the brewing group via the gears
SKU: 7102191
Grinding Burr Set RH for SAECO/GAGGIA
Conical External ø 47.8/31.7mm | Internal ø 28/10mm | Thickness 20 mm
SKU: 1251098
Shower Screen for Piston – JURA
Shower Screen 34mm
Fits on the brewing unit piston
Generic alternative 1081150
SKU: 1081115
Brew Unit Gear 82mm 108 Teeth for SAECO
82mm 108 Teeth | Overall height 67mm | Tooth height 5mm
Paired with 1212015
SKU: 1212012
Brew Unit Gear 60/11mm 90/12 Teeth for SAECO
60/11mm 90/12 Teeth | Tooth height 18mm
Paired with 1212012
SKU: 1212015